Repairs to uPVC Windows

uPVC is a great option for modern homes. They are long-lasting, durable and easy to maintain. Unlike timber and aluminium, they don't rust or rot.

It is crucial to wash and oil UPVC windows and uPVC window repair doors on a regular basis. This will reduce repair costs as well as improve energy efficiency.

1. Broken Glass

The broken glass in your windows can cause serious damage to your home, and could even be fatal. It is essential to take the time to ensure that you are doing everything you can to keep your windows in good shape.

Single-pane windows are fairly simple to replace, and they will usually fit into the frames of the past easily. However If windows with double glazed window repairs near me panes are secured by internal beading, it will be more difficult to get rid of the existing panes and install new ones. In this situation, you will need to find some plastic spacers that will help the new pane to fit perfectly into the window frame.

If you're planning attempt to remove the window repairs near me panes yourself it is important to wear the proper safety gear, including thick gloves and eye protection. It is also recommended to lay down a drop cloth before you begin working on the window panes so that any shards fall on the fabric, not onto the floor which could cause them to be trampled.

After the glass has been removed, it's a good idea to cover the gap with packaging tape or duct tape to block water and drafts from entering the home until a professional comes out and repair the window. This also serves as an obstruction to prevent criminals from getting into your home. If the gap between the door and the window is large, you might want to use an alarm system that includes an opening. This will provide the best of both.

2. Sagging

uPVC is a durable, energy-efficient and affordable alternative to timber sash window. Over time, they can be affected by a variety of issues, including sliding. A sagging window in uPVC can cause issues with light, draughts and even security. If you find that your uPVC window is beginning to sag it's crucial to act fast to stop the issue from getting worse.

Repositioning the hinges could aid in fixing a window that is sagging. First, you'll need to open the windows so you can access the frame. Then, you can remove the top and bottom hinges with a screwdriver and adjust them counter-clockwise or clockwise. Close your window to check the fit after having moved your hinges. If you're happy with the fit, tighten the screws to ensure they remain in position.

If you are unable to move the hinges, you could have to replace the seal. Rubber seals can dry out and lose their elasticity over time, causing them to lose their tightness. If this happens, it's essential to replace the seal as quickly as you can to ensure that your uPVC windows are waterproof and secure from draughts.

Upvc window repair handles may also become loose. This is usually due to screws that have become undone over time, but it could be due to the handle mechanism wearing out. Luckily, it's not difficult to repair the handle of a window that is loose yourself. First, you'll need to close the window and then perform an initial test fit. The corners of the sash must be aligned with the casing joint. If it doesn't, you can make use of a screwdriver to loosen the handle and return the mechanism to its original its original position.

3. Water Leaks

It is essential to take action if you wake up every morning to discover mouldy walls and wet floors. Water leaks from windows not only lead to the degrading of the structure of your home but also hamper your efforts to control the temperature inside your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.

This is a fairly simple fix and should be undertaken by any skilled DIYer. Depending on how severe the issue is, old caulking might need to be removed. It is crucial to keep in mind that when it comes to uPVC window repairs you should avoid the temptation to "over-caulk' as this will only make the area more difficult to clean and could reduce your energy efficiency.

Check that any drainage holes have no debris in them and that the sill pan has been angled correctly to drain away from the window. In more serious cases, you may need to replace the window.

Mold spots and rotted sills are also signs of water leakage. This fungus thrives in conditions of dampness and can spread quickly throughout the home.

It is also important to keep in mind that if the leakage originates from the glass of your double-glazed windows it may be more likely to be an issue with the glass seal, rather than the frame or sagging. This can be easily fixed by an uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.

4. Faulty Hinges

If your uPVC windows are stiff to open, or loose and blow open with a breeze, it may be hinges at fault. Anyone with the skills to fix them can replace hinges in just a few minutes.

Like all mechanical parts, hinges can be damaged over time. The process of replacing a hinge on a window is essentially a very simple process but it can be easier to do when you have a person to help hold the frame up.

Check that the uPVC hinges are closed and open in the right direction. Look for the arrows on each hinge to determine which way the window should be opened.

The issue could be caused either by opening the window improperly or by a poor installation at the factory. This can often be resolved by sending us a picture through our website and we will be pleased to offer you advice.

It is also essential to lubricate the hinges on a regular basis. Applying an engineering lubricant that is light to the hinges is a good method to accomplish this. We suggest using an oil that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It can also stop corrosion and decrease the chance of sticking. This is recommended to be done at least every year. WD40 or other solvent-based oils should not be used as they could damage your uPVC windows.

5. Draughts

Draughts can be caused by several different causes. Firstly the hinges, again due to wear and tear could become misaligned. This will cause a gap to form between the sash and the frame. If they are beyond repair, it might be required to realign them. The interlock, which is located on the hinge of the window and can also become misaligned, again it may be possible to give them a thorough clean, however in certain cases, it may be necessary to get them replaced.

These seals can wear down or become damaged over time, allowing air escape. Replacing these with high-quality weatherstripping will help to stop draughts. Replace the upvc windows with low-emissivity glass. This will help regulate indoor temperatures, and reduce the risk of draughts.

The last way to reduce drafts effectively is to use a draught-excluder. These are usually fabric tubes filled with a filler which can be put on top of your window sill. These will help to stop cold air from entering and keep your home warm and cozy!

The windows made of upvc can keep providing excellent insulation and security for your home with a little regular maintenance and repairs. However, it is important to recognize that windows last for a certain period of time and there may come the point when it's more economical to replace them than repair them. So, if you are having issues with your upvc windows, it's best to seek professional assistance as soon as possible.